Photonics-Enabled Cloud Compute Summit 26 - Key Takeaways

Spotlight thumbnail

By Jake Biele, CEO

Demand for AI optics is no longer the open question. The open question is whether the industry can build it fast enough and reliably enough.

That was my main conclusion from the Photonic-Enabled Cloud Computing (PECC) Summit, held in Sunnyvale, California in October. Around 40 companies presented, including cloud operators, chipmakers, foundries, laser suppliers, and packaging specialists. These are the five themes that stood out for us at Light Trace.

1. Demand keeps being revised upwards

Forecasts for data-centre optics are rising faster than expected. Market analyst LightCounting now expects sales of optical transceivers, the modules that turn electrical signals into light, to grow by about 120% in 2026. It has raised its forecasts several times this year.

The cloud operators are seeing the same thing. Meta showed its compute forecast being pulled forward by years, and another major cloud operator said it has added twice as much optical hardware to its data centres in the last three years as in the previous 10 combined.

2. GPU utilisation is now the main measure

Optical links used to be judged mainly on cost per bit. The measure buyers now care about most is how much of the time their graphics processing units (GPUs), the chips that run AI workloads, spend doing useful work. Acacia summed this up on one of its slides: “Cost/bit is still important, but optimizing for GPU utilization is the key metric for success.”

The economics explain the shift. A data centre has a fixed power budget, so every watt the network uses is a watt that cannot go to the GPUs. Credo’s analysis of recent capacity deals values that budget at roughly $100 to $150 per watt. On that basis, it calculated that the power drawn by a $100 copper cable link ties up about $1,600 of compute capacity, 16 times what the cable costs to buy. Reliability counts for the same reason. A link expected to drop once every three years will drop every few seconds somewhere across a million links, and every drop stalls the job.

3. Pluggable modules remain, with NPO coming before CPO

Pluggable optical modules, which plug into the front of a network switch, are not going away. Arista expects shipments of OSFP modules, one of the main high-speed formats, to exceed 100 million units this year.

Co-packaged optics (CPO) puts the optical components on the same package as the switch or processor chip. It is already shipping, but research firm SemiAnalysis now puts full-scale production in 2028 or 2029.

Near-packaged optics (NPO) sits between the two. An NPO engine sits in a socket on the circuit board beside the chip, so it saves power while staying replaceable. The Open CPX industry group, which has more than 50 members, expects NPO production deployments in 2027, with others listing NPO a year ahead of CPO in their roadmaps.

4. Supply is now the constraint

The limiting factor has moved from orders to production capacity. Lumentum’s CEO said in July that, even with five fabs, the company is shipping more than 30% less than its customers want of indium phosphide lasers, the light source in most optical links. He added that across Lumentum and Coherent, “I don’t think we can service the demand that NVIDIA and others are now putting on us.” NVIDIA’s slide on its own optics ramp noted that “the whole industry is experiencing growth pains”.

New products also have to ramp faster. Data presented at PECC shows that 10 gigabit-per-second (10G) optics took about 15 years to go from 10,000 to 10 million units shipped, while the current 1.6 terabit-per-second (1.6T) generation is expected to take about 4. One large cloud operator wants new optics to reach a million units within months of launch.

5. Fibre-to-chip attach is where scaling breaks down

By our count, 15 of the roughly 40 presenting companies described attaching optical fibre to photonic chips, or fibre connectivity more broadly, as a challenge to scaling. They ranged from chipmakers and foundries to cloud operators and packaging specialists.

In general, a single-mode fibre must be positioned to within about ±2 µm of a standard edge coupler to keep loss below 1 decibel (dB), a tolerance often described as “too tight to scale”. Multiple estimated place the packaging costs at around 80% of the cost of a photonic integrated system. A leading foundry described CPO as “fundamentally a packaging challenge as much as a photonics challenge”.

Speakers broadly agreed on the direction. They want alignment precision built in at wafer level rather than achieved during assembly, and fibre that can be detached where optics sit on the chip package. Molex called for an end to active alignment, in which each fibre is adjusted while light is measured.

The US data-centre build-out

The five themes above are about technology and supply chains. Whether all of this capacity gets built also depends on planning and power approvals, and in the US that picture has shifted since the summit.

Since the summit, opposition to new US data centres has grown at local and state level, and several analysts expect delays to projects planned for 2028 and later. Much of the capacity due in 2027 is already under construction.

If new sites, power, and permits become harder to secure, operators will need more from the GPUs they already have. That would make utilisation, reliability, and output from constrained parts more important still.

What this means for Light Trace

Much of the hard physics inside photonic chips has been solved. The harder problem now is manufacturing. How do we scale the packaging of integrated photonics, in a way that is simultaneously passive, low complexity, and high performance?

That is the problem LTP is focused on solving. Our Universal Photonic Interconnect (UPIc™) is designed to attach fibre to silicon photonics chips without active alignment or adhesive, with the alignment precision defined at wafer level. The same approach is intended to scale across pluggable modules, NPO, and CPO.

If you are working on fibre attach for AI optics, we would like to hear from you.